Getting Started; Testing - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

5 Button for selecting internal micro-
phone
6 On/off button
7 Button for selecting listening via
transmitter
8
Volume and Tone LED Indicator
9 Button for increasing sound level
10 Button for reducing sound level
11 Button for reducing treble
12 Button for increasing treble
13 Headphone output 3.5 mm jack
plug
14 Charging socket
15 Clip
56
Transmitter unit
16 Internal microphone for Transmit-
ter Unit
17 Battery status LED
Green: Switched on with well charged
battery
Blinking Orange and Green several
times: An external sound source has
been connected
Blinking Green: Switched on but
the battery charge is low
Blinking Orange: Switched on with
flat battery - will soon switch itself off
Orange: Charging
18
On/off button
19
Button for pairing up Transmitter
Unit with Receiver Units
20 External sound source input
2.5 mm jack plug
21 Charging socket
22
Clip

Getting started

Testing

1 Both the Transmitter and Receiver Units are supplied with built-in rechargeable
batteries. The batteries in both the Transmitter and Receiver Units must be fully
charged before using the products for the first time. Please use the charger
supplied.
2 Connect the Headphones to the headphone output (13) and switch on the
Receiver Unit with the On/Off button i (6). Listen to the Receiver Unit's micro-
phone and adjust the volume using the Volume Buttons + or - (9 or 10).
3
Switch on the Transmitter Unit using the On/Off button i (18) and switch
over to listen via the Transmitter Unit's microphone by pressing the external
sound button (7). If you connect the Transmitter Unit Sound Input (20) to the
headphone output on an external sound source, you can, for example, listen to
music via the Transmitter.
The volume control adjusts the sound level. + (9) raises and - (10) lowers
the volume while the Volume and Tone LED Indicator (8) shows the sound level.
The more LEDs that are lit the higher the volume. The LED indicator goes out 5
seconds after the sound volume has been set.
The tone control adjusts the sound quality. > (12) increases and < (11) reduces
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
57