Combined Signal Sources; Wireless Digital Transfer - Bellman & Symfon Audio Domino BE2210 Bedienungsanleitung

In some cases it may, for example, be easier for a lecturer to have an external
microphone and a Transmitter Unit in his/her pocket than to speak in a loud
voice or carry a wired microphone.
A Transmitter Unit can transmit speech to one or more Receiver Units at the
same time.
The input sensitivity is automatically adjusted to a suitable amplification when
an external microphone is connected.
Please note that the Transmitter Unit's Battery Status LED (17) blinks alter-
nately green and orange several times when an external sound source is
connected.
2 s
the M button (5) until both the MIC (2) and RF LEDs (4) light up.
68
Combined signal
sources
When you are listening via
the Transmitter Unit's micro-
phone or an External Sound
Source, this sound can be
combined with the sound
that the internal microphone
in the Receiver Unit is receiv-
ing. Choose to listen on the
Transmitter Unit by pressing
the R button (7). Hold down
If you want to go back to listening on the Transmitter Unit, press the R-button
(7) and if you want to switch over to listening on the internal microphone, press
the M button (5) instead.

Wireless digital transfer

Bellman Audio Domino uses the latest radio communications technology to
digitally transfer sound with an exceptionally high sound quality in stereo.
The radio transmission is encrypted to ensure the highest level of security and
confidentiality.
Radio communication takes place on 2.4 GHz which is a frequency range
whose use is permitted throughout the world.
The sound from the Trans-
mitter Unit is mixed with
the sound from the internal
microphone. You can adjust
the balance between the
Receiver Unit and the Trans-
DE
mitter Unit's microphone
DK
by holding down the M
EN
button(5) at the same time as
ES
setting the balance using the
FI
< (11) or > buttons (12).
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
69