Stages In Wash Programme - Edesa 511 Installationsanleitung

5
COMMISSIONING
In order to switch on
the washing machine,
press the on/off button.
The display situated over
the button will light up
and the washing machi-
ne will start the selected
programme with the
options.
If your washing machi-
ne has a display, you
will be able to see how
many minutes are left
until the end of the wash.
Switching on
the delay
This consists of pressing
the on/off button after
selecting the program-
me, the wash options
and the delay time.
When pressed, the dis-
play will flash in cycles
of 2 seconds ON and 2
seconds OFF during the
whole of the period
selected as the delay,
6

STAGES IN WASH PROGRAMME

The active phases at
each point of the pro-
gramme shall appear as
the programme progres-
ses.
Any option button may
be selected as long as
the phase in the pro-
gramme in which it takes
effect has not ended and
as long as the program-
me allows this option.
Pressing the delay but-
ton during the wash has
whereas the time shall
be discounted by the
hour, until the last hour,
when it will show the
minutes left until the pro-
gramme begins.
no effect on the washing
machine.
IMPORTANT
If you use the selec-
tor to change pro-
grammes while the
machine is working, it
will enter the PAUSE
mode. The on/off light
will go off and the
programme will be
annulled.
Operating Pilot Light
IMPORTANT
If you need to add or
remove a garment, select
pause and ensure that the
water level is not over the
door and that the inside
temperature is not high. f
you press the ON button,
the wash will recommence
at the same stage of the
cycle where it stopped.
If you press the On/ Off
button during the wash,
the washing machine will
enter the PAUSE mode
and this button's light will
turn off.
English
97