Edesa 511 Installationsanleitung Seite 104

• Why can't I see water in the drum?
• Why is water coming out of the drawer?
• Why can't I open the porthole door immediately after the wash ends?
• Other faults
This could be because the washing machine has a system
that allows it to adapt to the laundry load and the type of
material, adjusting the water level and the energy used
with a view to preserving the environment. This means that
during the wash process, although the amount of water
you can see through the porthole door may seem low,
there is no need to worry. The wash and rinse will be
highly efficient.
Perhaps the drawer or dispenser needs cleaning. This sim-
ple operation is described in Maintaining and cleaning
the machine;
1- Cleaning the detergent drawer.
Modern washing machines are equipped with safety sys-
tems to protect users. One of these is that it is not possible
to open the washing machine until the drum has come to a
complete halt. That is why it takes about 2 minutes before
you can open the porthole door.
– The washing machine is able to detect other faults.
When this happens, all the displays for the various wash
stages will flash or different errors will appear on the dis-
play, F05, F06......,F10.
– These faults may be due to very diverse causes.
– Solution: call the OFFICIAL TECHNICAL SUPPORT SER-
VICE