Stages In Wash Programme - Edesa L3126 Handbuch

5
COMMISSIONING
In order to switch on
the washing machine,
press the on/off but-
ton. The display situa-
ted over the button will
light up and the was-
hing machine will start
the selected program-
me with the options.
If your washing
machine has a
display, you will be
able to see how many
minutes are left until the
end of the wash.
Switching on
the delay
This consists of pres-
sing the on/off button
after selecting the pro-
gramme, the wash
options and the delay
time.
When pressed, the
display will flash in
cycles of 2 seconds
ON and 2 seconds OFF
during the whole of the
6

STAGES IN WASH PROGRAMME

The active phases at
each point of the pro-
gramme shall appear
as the programme pro-
gresses.
Any option button may
be selected as long as
the phase in the pro-
gramme in which it
takes effect has not
ended and as long as
the programme allows
this option.
Pressing the delay but-
period selected as the
delay, whereas the time
shall be discounted by
the hour, until the last
hour, when it will show
the minutes left until the
programme begins.
ton during the wash has
no effect on the washing
IMPORTANT
If you use the selec-
tor to change pro-
grammes while the
machine is working, it
will enter the PAUSE
mode. The on/off light
will go off and the
programme will be
annulled.
Operating Pilot Light
IMPORTANT
If you need to add or
remove a garment, select
pause and ensure that the
water level is not over the
door and that the inside
temperature is not high. f
you press the ON button,
the wash will recommence
at the same stage of the
cycle where it stopped.
machine.
If you press the On/ Off
button during the wash,
the washing machine will
enter the PAUSE mode
and this button's light will
turn off.
English
95