Operating Elements - VOLTCRAFT LSG-4 Bedienungsanleitung

OPERATING ELEMENTS

(see fold-out page)
1 LED indicator for cable detector (L1: cable status, continuity tester; L2: Battery replacement
display)
2 "Sel" toggle key for cable detector (signal tracing with permanent or wobble sound)
3 "Tone" duty switch for cable detector
4 Rotary switch
5 Display (LCD) for multimeter
6 MODE button for switching the measuring functions diode test and continuity tester
7 COM measuring socket (reference mass, minus potential)
8 V measuring sockets for all measuring functions of the multimeter (plus potential)
9 HOLD button for "freezing" the display value
10 MAX button; records the maximum value in the voltage measuring range.
11 Battery compartment on the rear
12 Removable protective rubber frame with setup brackets on the rear
13 "Cont" duty switch for continuity testing with cable detector
14 Banana clip measuring leads for cable detector and status test (red = Lb, black = La)
15 Modular connector for cable detector and status test
16 Headphone socket for 3.5 mm jack plug
17 Integrated loudspeaker
18 Battery compartment on the rear
19 Button for loudspeaker playback during cable tracking (depressed = loudspeaker on)
20 Rotary duty switch with volume control for tracking signal (0 = off, 1 = low, 9 = high)
21 Insulated test prod for cable tracking
24