Pari VELOX Gebrauchsanweisung Seite 52

• Close the tab on the underside of the
device.
• Fill the VELOXcare with 2.5 ml isotonic sa-
line solution or distilled water.
Operation with the power adapter:
• Insert the USB plug of the power adapter in
the USB port on the controller.
• Connect the power adapter to a suitable
power socket.
Æ The VELOXcare is ready to operate.
• Press the On/Off button on the controller to
begin rinsing.
Æ The device emits a short acoustic signal.
Æ The LED on the button lights up green.
Æ The rinsing function is executed.
• As soon as all of the rinsing fluid has run
through, switch the device off by pressing
the On/Off button again.
Æ The device emits a short acoustic signal.
Æ The LED in the button goes out.
– 52 –
max. 2.5 ml