Connection - Renkforce B-400 Bedienungsanleitung

• Set up the fog machine taking into account the above safety notices or mount it on the mounting bracket.
The assembly must never swing freely.
• Secure the device with assembly equipment that is compatible with the attachment surface and suitable
for carrying the weight of the fog machine.
• Additionally secure the installation with a suitable safety restraint cable. The safety restraint cable must
be able to support the device in the event of a fault in the main support system.
• Align the fog machine horizontally and tighten the bracket clamping screws.

9. Connection

The mains socket to which the device is connected must be easily accessible so that it can be
separated from the mains voltage quickly in case of an error.
Do not let the mains cable come into contact with other cables.
Be careful when handling mains cables and mains connections. Mains voltage may cause po-
tentially fatal electric shock.
Make sure that no cables are lying around openly. Install cables professionally to prevent ac-
cidents.
Convince yourself that the device is switched off before you connect it to the power supply.
Ensure before plugging in the mains plug that the device voltage indicated on the rating plate
corresponds to the available mains voltage. Do not connect the device if the indication does
not correspond to the available mains voltage. Incorrect supply voltage may lead to irreparable
damage to the device and danger to the user.
• Install the connection cable for the remote control up to the site from which you are going to control the
device.
• The rear of the remote control is magnetic. The remote control thus sticks to metal objects.
• Plug the mains plug into a mains socket with a protective ground contact for operation of the device.
However, do not plug in the mains plug. Before connecting the device to the power supply, you first have
to fill the tank with fog liquid (see "Operation").
23