Herunterladen Inhalt Inhalt Diese Seite drucken

Manual Tune; Manuel Tune; Storing A Dab Station Preset - Imperial DABMAN 30 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DABMAN 30:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3. If you are using your DAB radio in another country, then press and hold the 'Scan'
button for 2 seconds to begin a wider, national and local scan. The display will change
to 'Autotune Full scan', followed by 'Searching...'. A progress bar will show the pro
gress of the scan and the number of stations found during the scan will also be
displayed. A national and local scan takes approximately 1 minute but can take up to 3
minutes.

7.3 Manual Tune

Using the manual tune feature you can select a specific digital radio channel frequency
and then manually adjust the aerial, or the location of the radio, to get the strongest
possible signal for that channel in your location.
1. Press and hold the rotary 'Tune' control until 'Manual tune' is displayed.
2. Turn the rotary 'Tune' control to scroll through the digital radio frequencies. Stop
when the frequency you would like to listen to is displayed and your radio will then at
tempt to tune to that frequency. 'Tuning...' will be displayed.
Note: You may need to adjust the aerial or move your radio to get the strongest possible
signal.
3. Press the rotary 'Tune' control to display the radio text for the frequency that you have
selected. 'MAN' will also be displayed in the top right of the display to remind you that
you are in Manual tune mode.
4. Press the rotary 'Tune' control again to return to DAB autotune mode. 'DAB' will be
displayed in the top right of the display.

7.4 Storing a DAB station preset

Your radio can store up to 10 DAB stations in its preset memories for instant access
to your favourites stations
Note: When you store DAB radio station presets, these do not overwrite your FM station
presets.
1. Tune your radio to the station that you wish to preset.
2. Press and hold the 'Preset' button. Preset location 1 will be displayed.
3. Turn the rotary 'Tune' control to the preset location that you would like to store the ra
dio station to (1-10). Press the 'Tune' control to save the station to the displayed
preset location. The display will confirm 'Preset X stored', where 'X' is the number of
the preset location (1-10).
Note: If there is already an existing DAB station stored under a preset location, it will be
over written when you store the new station.
22-130-00_BDA_IMPERIAL DABMAN 30 3 Sprachen_11_16.indd 29
29
IMPERIAL DABMAN 30
16.11.16 11:05
E

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis