Software - Migatronic FLEX2 3000 Compact Betriebsanleitung

Inching
The function is
used for wire
inching e.g. after
change of wire.
Switch on Press  Weld
The machine is almost ready to use
Switch on the welding machine

on the main switch (2)
Select internal/external control (see page 20)

Select welding program

A welding program must be selected in relation to
welding wire, shielding gas or possible electrode.
Please read how this should be selected on your
welding machine in the quick guide.
Adjust the welding current

Please read your quickguide
Weld


SOFTWARE

In case of exchange of the control unit, software must
be reloaded, using an SD card.
Latest software can be downloaded at
www.migatronic.com.
Save the software on an SD card containing the
folders and one or more of the files shown below.
To order SD card, use item no. 26460002.
Software reading
 Insert the FLEX
slide in the right side of the machine.
 Turn on the machine.
 The display flashes shortly with six lines.
 Wait until the set current is displayed.
 Turn off the machine and remove the SD card
 The machine is now ready for use.

All machine user settings are deleted when
the file 10645900.bin has been inserted.
Therefore, always remove the SD-card from the
machine after the software update. Thereby,
continuous software update is avoid each time
the machine is turned on.
If the SD-card contains software for other units e.g.:
10020115.cry
10020113.cry
These units will be updated if they are connected to
the CAN network.
Please note that this update will be longer in time, so
please do not turn off the machine until the standard
control panel will be displayed at
2
FLEX 3000 Compact.
Licence SW
If additional licences for programs or special functions
have been bought, then the MigaLic.dat files should
be read by the machine in the same way as SW-
packages. Please remember to save a backup file.
The MigaLic.txt file contains information about
machine licence number and containing licences at
the SD-card.
19
2
3000 Compact SD-card in the
RWF
RCI