Adding The Central Unit To The Smart Home App; Adding A New Device To The Smart Home App - Medion P84755 Bedienungsanleitung

9.4. Adding the central unit to the Smart Home app

 When setting up your Smart Home system for the
first time, start the Smart Home app and follow the
step-by-step instructions.
 If you are expanding an existing Smart Home system
to include another central unit as a receiver, start the
app and go to the Settings menu.
 Tap on Add ∑Central / unit.
 Select ∑ Central.
 Tap on Configure.
 Follow the instructions given by the Smart Home
app in order to add the central unit ( ∑ Central) to the
existing Smart Home system.
 Hold down the PAIR button for approx. 3 seconds
until the LED for the button flashes.
 In the Smart Home app, select the WiFi router to
which the central unit should connect.
 If necessary, enter the network password.
 Follow the instructions on the app.
The central unit will now be synchronised with the CloudServer.

9.5. Adding a new device to the Smart Home app

 Tap on Settings in the Smart Home app.
 Select Add ∑Central / unit.
 Under New Device, select the icon for the new
component:
− ∑ Door (door/window contact)
− ∑ Motion (motion sensor)
− ∑ Smoke (smoke detector)
− ∑ Shock (vibration sensor)
− ∑ Central (central unit)
− ∑ Plug (smart plug)
− ∑ Thermostat (radiator thermostat)
 Tap on configure.
 Follow the instructions given by the Smart Home
app and enter the device PIN.
You can find the relevant device PIN on the device hous-
ing.
66 of 74