Smoke Detector; Motion Sensor; Vibration Sensor; Weather Sensor - Medion P84755 Bedienungsanleitung

7.2. Smoke Detector

A 3V type CR123A battery is included in the delivery for
the smoke detector.
 If the battery is flat, replace it with a new battery of
the same type.
 Insert a flat object or a fingernail into the recess on the battery compartment
cover and lift open the cover.
 Remove the flat battery and insert the new battery in accordance with the cor-
rect polarity (see diagram). Ensure that the red safety catch is pressed down by
the battery.
The red safety catch prevents the smoke detector being mounted with-
out a battery.
 Close the battery compartment cover again.

7.3. Motion Sensor

 Remove the battery compartment cover on the back
of the motion sensor.
 Place one 3.6 V type 1/2 AA/ER14250 battery into
the battery compartment of the motion sensor.
Check the battery polarity (see diagram).
 Close the battery compartment.

7.4. Vibration Sensor

A button cell battery (3 V type CR2032) is included in
the delivery.
 Insert a flat object into the recess on the battery
compartment cover and lift off the cover.
 If the battery is flat, replace it with a new battery of
the same type.
 Remove the flat battery and insert the new battery
in accordance with the polarity shown in the battery
compartment (see diagram).
 Place the battery compartment cover back onto the sensor until it audibly clicks
into place.

7.5. Weather sensor

 Remove the battery compartment cover on the back of the weather station.
 Insert two type LR03 / AAA/ 1.5V batteries in the battery compartment of the
weather station. Check the battery polarity (inscribed on the bottom of the bat-
tery compartment).
58 of 74