Smoke Detector; Risk Of Electric Shock - Medion P84755 Bedienungsanleitung

8.3. Smoke Detector

You can mount the smoke detector on either the ceiling or on the wall near to the
ceiling.
 Ensure that the smoke detector is located within the reception range of the
Smart Home central unit. If the reception from the smoke detector is not suffi-
cient, change the position of the Smart Home central unit or, if required, add a
second central unit to increase the range of the Smart Home network.
ATTENTION!
Risk of false alarms.
Unfavourable environmental conditions can trigger a
false alarm.
 Therefore, do not mount the smoke detector:
− in rooms with large amounts of water vapour, humidity,
dust or smoke (e.g. kitchens, laundry rooms, bathrooms).
− near to hearths or open fireplaces.
− next to ventilation shafts because the air flow could divert
smoke form the smoke detector.
− near to electrical interference (e.g. electricity meters, metal
cupboards, metal walls).
− near to fluorescent lamps and energy-saving bulbs because
the starters used to switch on the lights could trigger a false
alarm (distance to the device: min. 50 cm).
 Pull the mounting plate off the device.
 Select a suitable mounting location and hold the mounting plate against the
ceiling/wall. Use the mounting plate to mark the two drill holes.
DANGER!

Risk of electric shock!

There is a risk of electric shock when drilling into a wall.
 When drilling, ensure that no concealed electrical
wires or water pipes are damaged.
 Drill two holes suitable for 6 mm wall plugs.
 Insert the wall plugs.
 Fit the mounting plate using the two screws but do not tighten the screws for
the moment.
 Slide the long holes on the mounting plate over the screws to secure the device
against falling down. Now tighten the screws fully.
60 of 74