Safety Instructions - HellermannTyton MK3PNSP2 Betriebsanleitung

M K 3 P N S P 2
. . . . . . .

Safety instructions

This operating instruction should be studied carefully before initial use of the tool MK3PNSP2.
It is important that these instructions are understood by all personnel using this tool.
The HellermannTyton tension tool MK3PNSP2 may only be applied for the purpose described in
this operating instruction.
The tool should only be used by trained personnel and may cause damage if incorrectly used.
Any unauthorized modification to the tool carried out by the user will invalidate the
manufacturer's liability to any resulting damage or injury to personnel.
All tools meet the safty requirements before leaving the factory. If any apparent misuse of the
tool is evident, then the warranty is invalidated and an appropriate repair charge will be made.
No safety or protective systems may be removed or made ineffective.
The tension tool must only be repaired/maintained by the manufacturer or by skilled persons
trained by the latter.
Disconnect the air supply before doing any repairs or maintenance to tool.
The tension tool must only be operated with compressed air (max. 6 bar oiled/non-oiled).
The MK3PNSP2 must not be operated from a compressed air cylinder.
Caution: Protective glasses should be worn!
This operating instruction should be kept at the working place, so that arising
problems can be solved immediatly. Any misuse or deviation from these safety
recommendations will create a safety hazard.