Notes For The User; Information About The Product; Warranty; Contact Data - HellermannTyton Autotool 2000 CPK Betriebsanleitung

1 Notes for the user

These Operating Instructions are very important for correct
use of the device.
They contain important information and safety instruc-
tions that will enable you to utilise the product correctly
and economically for its intended use.
The instructions help avoid hazards, reduce repair costs
and downtimes, and enhance the dependability and
durability of the device.
Non-compliance of any nature whatsoever can lead to
accidents with fatal consequences, injury or damage to
property.

1 .1 Information about the product

Product designation: AT2000 CPK
Article number: 106-29004

1 .2 Warranty

The warranty is in accordance with statutory require-
ments. Warranty entitlement applies only in the country
in which the device was originally purchased.
Batteries, fuses and light sources are not covered by the
warranty.

1 .3 Contact data

The manufacturer of the product described in these
Operating Instructions is:
HellermannTyton GmbH
Grosser Moorweg 45
D-25436 Tornesch, Germany
Tel. +49(0)41 22/70 1-0
www.HellermannTyton.de
toolsystems@HellermannTyton.de

1 .4 Information about these Operating Instructions

Last update: April 02, 2015

1 .5 Copyright and intellectual property rights

The manufacturer retains the copyright to these Operating
Instructions. Under no circumstances may these
instructions be reproduced or electronically processed,
replicated or disseminated, in whole or in part, without
the prior written consent of HellermannTyton GmbH
(hereinafter referred to as HellermannTyton). Any breach
or infringement of these stipulations will result in liability
for damages.
AT2000 CPK • Operating Instructions • 04-2015 • 106-29004
1 .6 Keeping and dissemination of the Operating
Instructions
These Operating Instructions must be kept in the
immediate vicinity of the workplace and must be
available at all times to all operating personnel.
The operating company shall inform the operating
personnel of the location of these Operating Instructions.
The operating company shall obtain replacement from
the manufacturer if these Operating Instructions are,
become or are rendered no longer easily legible.
If the device is acquired by or sold on to a third party the
following documents must be handed over to the new
owner:
• These Operating Instructions
• Documents relating to repair work
• Logs of repair work undertaken
f Protect these Operating Instructions from moisture,
direct sunlight and extreme heat.

1 .7 Target group of these Operating Instructions

These Operating Instructions must be read and complied
with by every person charged with any of the following
tasks:
• Assembly
• Operation
• Servicing
• Repair
• Fault rectification

1 .8 General information

All accompanying drawings are not covered by the change
service.
Notes for the user
5