Connecting The Ola-54 - JDSU OLA-55 Bedienungsanleitung

3 G
ETTING

Connecting the OLA-54/-55

Bidirectional connection
The OLA-54/-55 can be operated bidirectionally. This
means that there is no fixed assigned of test ports (e.g.
"Input left" and "Output right"). Due to the symmetrical
design, the signal direction has no influence on the
attenuation value.
Direct connection via test adapters
The BN 2150/00.xx range of accessories includes a
number of test adapters for connecting the OLA-54/-55
to the interface to be tested (connector or bare fiber).
Using these adapters, you can connect all standard
optical connector types to the instrument. The test
adapters are suitable for connectors with planar (PC)
and angled end surfaces (APC).
For available adapter contact your local Acterna Sales
Company.
Mounting the adapters
1. Place the test adapter vertically on the optical
connector.
2. Close the locking lever when the test adapter is firmly
seated. You will hear the locking mechanism lock.
3. Fit the fiber optic cable to the test adapter or close the
dust cap.
Fig. 5 BN 2150/00.xx adapter.
14
S
TARTED
2
1
Acterna OLA-54/-55