Maintenance And Care; Transport; Storage - Kärcher SDP 18000 IQ Level Sensor Handbuch

set the trail time/pump time to the set value
of 10 seconds.
The optimising of the trail time/pump time
prevents frequent switching on and off of
the pump during rapidly increasing water
levels. In this case, the pump will work even
more effectively, the higher the IQ Level
Sensor is installed.
 Set the switch at the IQ Level Sensor to
AUTO position
Manual operation
In manual opertions the pump remains
switched on continuously.
 Set the switch at the level sensor to ON
position
Note:
Dry run leads to increased wear and tear;
do not leave the pump unattended when it
is running. Switch off the pump within 3
minutes of dry running.
Flat suction (only SCP 16000)
In flat suction mode, the fluids can be
sucked off up to 1 mm of residual height.
 Remove pre-filter
 Fold in the folding feet
 Set the switch at the level sensor to ON
position
 When the remaining fluids have
reached a height of less than 20 mm,
press the dearation key or switch on/off
the pump many times by pressing the
mains switch till the fluid is sucked off.
Finish operation
 Set the switch at the mains plug to OFF
position.
 Disconnect the main plug from the
socket.

Maintenance and Care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
16
Note:
Contaminations can accumulate and lead
to malfunctions.
 Rinse the pump with clean water after
use.
Clean the pre-filter with clean water.
Especially after running chlorinated wa-
ter or other liquids that leave residue
behind.
 In order to ensure a reliable switching of
the pump, the IQ Level Sensor should
be cleaned with a cloth (at least every 2
to 3 months).
The appliance is maintenance-free.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
during transport (see Specifications).
When transporting by hand
 Lift appliance by the carrying handle
and carry it.
When transporting in vehicles
 Secure the appliance against shifting
and tipping over.
Caution
In order to prevent accidents or injuries,
keep in mind the weight of the appliance
when selecting a storage location for it (see
Specifications).
Storing the Appliance
 Store the appliance in a frost free area.
– 4
EN
Care
Maintenance

Transport

Storage