Knick Protos 3400 Benutzerhandbuch Seite 38

Configuring the Measurement Display
Select menu: Parameter setting/Module FRONT/Measurement display
Pressing meas (1) returns the analyzer to the measuring mode from any
function.
All process variables coming from the modules can be displayed.
The table on the next page describes how to configure the measurement
display.
1
38
7.00
pH
8.06
pH
24.0°C 25.8°C
Measurement display
Typical display for
2 pH measurement points.
Secondary displays
Additional values, also date and
time, can be displayed depending
on the modules installed.
Softkeys
In measuring mode, the softkeys
allow selection of values for the
secondary displays or control of
functions (user defined).
PH 3400(X)-035