Technical Data; General Safety Instructions - Solo 621 Originalbetriebsanleitung

Chainsaw
Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.

1. Technical Data

The devices are manufactured in accordance with the provisions of DIN EN 60745-2-13 and fully comply with the
provisions of the Product Safety Act.
Model
Rated Voltage
Nominal Frequency
Fuse (time lag)
Rated Output
Rated Current
Guide Bar
Cutting length
Chain
Drive link width
Chain pitch
Speed
Weight
Oil
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
We reserve the right to make changes to the technical specifi cations.
Class of Protection:
Interference Suppression:
Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC
Machine Directive:
Noise emission values EN 60745-2-13:2011-07
Sound Pressure Level L
Vibration values in accordance with EN 60745-2-13:2011-07
Weighted acceleration handle
Attention: This chain saw is only intended for cutting wood !!!

2. General safety instructions

Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC
Machine Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection ! Please observe the local regulations when operating your device.
II/ DIN EN 60745-1
EN 55014
90 dB (A) [K=3,0 dB (A)]
pA
2
5,0 m/s [K=1,1 m/s
621
230 V~
50 Hz
16 A
2500 W
11,3 A
400 mm
380 mm
91PX 057X
1,3 mm
3/8''
ca. 12,5 m/sec
4, kg
300 ml
2
]
GB-2
ENGLISH