Front View; Remote Control - ECTIVE SI Series Montage- Und Betriebs-Anleitung

[
ECTIVE SINUS/SINE INVERTER – SI-/TSI-SERIES
®

Front view:

Illustration 6
terminal for direct connection
(from SI400- and TSI300-series)
Caution!
Please note the maximum power of the electronic devices!
For currents >15 A electronic devices have to be connected directly to the terminal for
direct connections .
ѥ
Warning!
Risk of electric shocks
The device is always equipped with security features to prevent dangerous electronic
shocks .
However, in order to ensure the highest possible safety during operation, it is impera­
tive that the inverter's ground connection be connected to a protective earth (usually
green­yellow cable) in any case .

Remote control

☝
Please note!
The remote is paralleled to the on/off button of the inverter . For a reasonable use of the
remote the inverter has to be switched off .
Please use only original ECTIVE accessories .
⚠
Caution!
Possible malfunctions
Only lay the remote control cable separately from live cables . Failure to do so may
cause interference and interfere with the remote control function .
]
L N L N G
39