ECTIVE SI Series Montage- Und Betriebs-Anleitung Seite 42

Front view: Illustration 7
Multi-function remote control K01
(available >= SI50-series)
K01 REMOTE CONTROL
1. battery status and
load display
Status display:
• load indicator: flashes 1x/sec . Indicates momentary consumption of the connected
electronic devices in 20 % steps .
• battery status: permanently illuminated . Indicates the remaining capacity of the
batteries in 20 % steps .
• Changes between the battery status and the load indicator every 8 seconds .
Error LED:
• Flashes red when error occurs . (see table "self error correction")
Status light:
• Stand­by display: Flashes when the device is in stand­by mode or if the power
consumption is < 5 % .
• AC on: permanently illuminated when the power is > 5% .
40
[
ECTIVE SINUS/SINE INVERTER – SI-/TSI-SERIES
®
1
2
2. LED "Error"
3
3. device "on"
]