Foot Pedal Input - sylvac Hi-Cal 300 Bedienungsanleitung

Command Corresponds to Function
M
MAX MAXimum
MIN MINimum
MM Millimeter
MOD? MODe
N
NOR NORmal
P
POS POSition
±xxx.yyy
PRE PREset
PRE
±xxx.yyy
PRE?
PRI PRInt
R
REF1 REFerence
REF2
RES2 RESolution
RES3
S
SET? SETting
U
UNI? UNIt
UNI0
UNI1
V
VER? VERsion

15. Foot pedal input

A foot pedal may be connected to act as PRINT key. Other functions may be assigned to
this external contact (see "Setting and parameter key chapter").
maximum mode
minimum mode
mm unit setting
interrogation of
Reply: NOR,DIA,AXI,MIN,MAX,DEL
normal mode
moves the probe to the position value transmitted. If an
obstacle inhibits movement, positionning is given up
displays the preset value
memorises a new preset value
memorised preset valuerequest
data request
reference 1
reference 2
0.001 mm - 0.00005 in resolution
0.01 mm - 0.0005 in resolution
interrogation of general parameters :
MM/IN RES2/3 REF1/2 KEY0/1 B0/1.
B0 = battery low, B1 = battery ok
measuring unit : MM or IN
mm/inch conversion locked
mm/inch conversion unlocked
instrument program version and date
the measuring mode :
51