Connecting The Power Supply; Operation - NUK Baby Menu Bedienungsanleitung

2.
Insert the base of the blade through the
opening at the bottom of the bowl.
3.
Apply the blade securing element
(flower-shaped nut) with the unlabelled
side facing the base of the blade.
4.
Turn the blade
counterclockwise until it locks into place.
Hold the blade on the inside of the bowl
while doing so.
Check that the blade has been correctly
installed by letting go of it and briefly
turning the blade securing element. The
blade must turn with the securing
element.
Note: To remove the blade, complete the
above steps in reverse order.
Never activate the device without a
correctly inserted blade.
6
securing element
2.2.2 CONNECTING THE POWER
SUPPLY
Before connecting the power supply,
ensure that the local mains voltage
7
matches the voltage required by the
device.
Always check the power cable for
damage before using the device. If
8
power cable is damaged, it must be
replaced by the manufacturer, its
after-sales service or by similarly
qualified personnel in order to avoid
hazards.
The device is operated with mains voltage.
Complete all preparatory work (section 2.3
ff.). Then connect the mains plug to the wall
socket.
Risk of electric shock! An electric
current passes through the base unit
9
during operation. Never immerse the
appliance in water.
Always disconnect the device from
the power
10
electricity is not required for the
current
removal or insertion of blades or
other detachable parts, storage).
Never use a defective device or a
device with defective accessories.
11

2.3 OPERATION

The NUK Baby Menu uses hot steam to
cook, heat and defrost food. This steam is
generated by heating the water in the water
reservoir. The steam is directed from the
base unit into the bowl via the lid. To allow
the steam to reach the bowl unhindered, it is
essential that the lid is correctly applied and
closed. The
mechanism for this purpose. It is particularly
important that an optimum connection is
established between the steam outlet
the base unit and the steam inlet
lid.
Excess steam
device via the steam outlet
25
supply
activity (e.g.
lid features a
is directed outside the
on the lid.
whenever
cleaning,
locking
of
on the