Use Of The Appliance; Setting The Water Softener - Electrolux ESL 66065 Benutzerinformation

22 electrolux
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators come on.
Activate the appliance. The appliance
is not in setting mode when:
• Only one programme indicator comes
on.
• The display shows the time of the wash-
ing programme or of the delay start.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Select
and start a washing programme'.
Audible signals
The audible signals indicate:
• The end of the washing programme.
• The electronic adjustment of the level of
the water softener
• The appliance has a malfunction.
Do these steps to deactivate the audible
signals:
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.

USE OF THE APPLIANCE

1. Be sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appli-
ance.
5. Set the correct washing programme for
the type of load and soil.

SETTING THE WATER SOFTENER

The water softener removes minerals and
salts from the water supply. These minerals
and salts can cause damage to the appli-
ance.
German degrees
(°dH)
51 - 70
Water hardness
French degrees
(TH°)
91 - 125
3. Press and hold function buttons B and
C until the indicator lights of function
buttons A, B and C start to flash.
4. Release function buttons B and C.
5. Press the function button C.
– The indicator lights for function but-
tons A and B go off.
– The indicator light for function button
C flashes.
– The display shows the current set.
6. Press the function button C again.
– The display shows the new adjust-
ment.
7. Switch off the appliance to keep the
operation.
Do the above procedure to activate
again the audible signals.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets
('3 in 1', '4 in 1', '5 in 1'), use the multi-
tab function (refer to 'Multitab func-
tion').
Adjust the level of the water softener if this
does not agree with the water hardness in
your area.
Contact your local water authority to know
the water hardness in your area.
mmol/l Clarke de-
grees
9,1 - 12,5 64 - 88
Audible signals acti-
vated
Audible signals de-
activated
Water hardness ad-
justment
manually elec-
troni-
cally
1)
10
2