Use Of Dishwasher Salt - Electrolux ESL 66065 Benutzerinformation

German degrees
(°dH)
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener
manually and electronically.
Manual adjustment
Turn the water hardness dial to the position
1 or 2 (refer to the table).
Electronic adjustment
1. Switch on the appliance.
2. Make sure that the appliance is in set-
ting mode.
3. Press and hold function buttons B and
C until the indicator lights of function
buttons A, B and C start to flash.

USE OF DISHWASHER SALT

How to fill the salt container:
1. Turn the cap counterclockwise and
open the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
Water hardness
French degrees
(TH°)
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
mmol/l Clarke de-
grees
7,6 - 9,0 53 - 63
6,5 - 7,5 46 - 52
5,1 - 6,4 36 - 45
4,0 - 5,0 28 - 35
3,3 - 3,9 23 - 27
2,6 - 3,2 18 - 22
1,9 - 2,5 13 - 17
0,7 - 1,8 5 - 12
< 0,7 < 5
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function but-
tons B and C go off.
– The indicator light for function button
A continues to flash.
– The display shows the current ad-
justment.
– The intermittent audible signals tell
the current adjustment.
Example: the display shows
termittent audible signals = level 5.
6. Press the function button A again and
again until the display shows the nec-
essary adjustment.
7. Press the on/off button to keep the op-
eration.
If the water softener is set electronically
to the level 1, the salt indicator light
stays off.
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
electrolux 23
Water hardness ad-
justment
manually elec-
troni-
cally
1) 9
2
1) 8
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1
/ 5 in-