Before First Use - SOLIS BARISTA PERFECT Bedienungsanleitung

THES E F I TT I NG -E XTRA S MA KE
■
YOUR SO LI S BARIS TA P E RF EC T UN IQ U E :
– PID Temperature Control
Electronic PID temperature control guarantees a temperature stability.
– Auto Purge Function
Automatically adjusts water temperature, after the steam function is used to
texture milk, to the optimal coffee extraction temperature.
– Heating Coil
The integrated stainless steel heating coil precisely controls the water temperature.
– Low pressure pre­brewing function
At low pressure, the coffee powder is gently moistened before brewing. This
makes it swell up, ensuring that the aroma is evenly extracted afterwards.
– Commercial Style Steam Wand
Swivel action for effortless milk texturing.
– Measuring Instrument „Razor"
With this blade-like instrument, excess coffee power can be removed with a flick
of the wrist.
POWER SAVING FUNCTION
To save power, the appliance switches to standby mode 1 minute after the last
espresso has been made. After further 20 minutes without use, the appliance
switches off completely.
72
BE FOR E FI RST USE
s
– Carefully take the appliance from the packaging and remove all stickers, labels,
package inserts and packaging materials.
– Remove all accessories from the appliance.
– Use the handle to lift out the water tank. Clean the water tank and the filter
baskets, the portafilter and the small milk jug with warm water and a gentle dish
washing liquid. Rinse well and dry thoroughly.
– Also, wipe the outer housing of the espresso machine and the drip tray with the
drip tray grill as well as the accessory compartment clean with a soft, slightly wet
towel and dry everything.
WARNING: Do not immerse the outer housing, power cord or power plug
in water or any other liquid and do not bring them into contact with water.
NOTE: The parts of the espresso machine and the accessories are not dish­
washer safe (Exceptions: Drip tray and drip tray grill).
– Fill the water tank with cold tap water to the maximum mark MAX (1800 ml).
Close the lid again.
– If you remove the water tank for filling, place it back in and slide it down along
the guide rail until it fixes into place.
– Plug the power cord into a power outlet.
– Press the POWER-button (A), the button surround will flash.
– A pumping sound will be heard while the machine is heating. Once the right op-
eration temperature has been reached, both button surrounds light up constantly
and the appliance switches to standby mode.
73