Cleaning And Care - AEG Electrolux EASYPRESSO Anleitung

Cleaning and care

1. Turn the machine off and let it
cool down. Wipe all outer surfaces
with a damp cloth. Clean clogged
holes in the fi lter and fi lter holder
with a pin or small brush.
1. Decalcifying is recommended
regularly, depending on water hard-
ness. Remove brewing head (keep
components together) before fi lling
the tank with water/decalcifyer
according to product instructions.
Make sure the fi lter is properly
tightened when re-installing the
components.
ELX12827_Bella_Espresso_AEG_5lang.indd 19
2. Lift out the drip grid, empty and
rinse the drip tray. Wipe the tray
and grid with a cloth before putting
them back.
2. Switch the machine on and heat
it up. Place a bowl on the drip grid.
Turn the selector dial to
tion and let 1/3 of the solution pass
through the system. Wait for 10
minutes at ON position, put a bowl
under the steam pipe and turn the
steam controller anti-clockwise.
3. Loosen the steam nozzle and
wash it under running water. Clean
the steam pipe with a cloth. Lift out
the water tank and rinse it under
running water.
3. Turn the selector dial to
position and let another 1/3 pass
posi-
through the steam nozzle. Wait for
10 minutes, turn the steam control-
ler clockwise and let the last 1/3
pass through the brewing head.
Repeat the process twice with fresh
water, without pauses.
d
GR
NL
F
GB
2009-10-20 13:28:16