Changing And Saving The Coffee Quantity; Setting The Grinding Texture; Setting The Coffee Temperature - AEG Electrolux CP 2 Serie Gebrauchsanweisung

822_949_318 CP2..._defnep.book Seite 38 Freitag, 2. November 2007 6:30 18
g
0 Repeat the process if you would like to
change the measures for the other cup
symbols.
3 The machine switches off automati-
cally on reaching the max. Cup Mea-
sure. The saved measures remain stored
when the coffee machine is switched
off. If your coffee cups or your taste
change, you can easily change the cup
measure(s) to your new requirements,
whenever you want.
10 Changing and Saving the
Coffee Quantity
You can set and save a different coffee
quantity for each cup symbol to your
individual requirements. This can be
done only for use with coffee beans,
not for use with ground coffee.
0 Repeatedly press the "Cup Size" key
(Fig. 3, d) until the desired cup symbol
is indicated.
0 Then repeatedly press the "Coffee
Quantity" key (Fig. 3, c) until the
desired coffee quantity indicator is
illuminated, and hold the key pressed
(Fig. 20).
After the key has been held for a few
seconds, all the coffee quantity indica-
tors are briefly extinguished (Fig. 21).
Now release the key. The coffee quan-
tity is now saved.
0 Repeat the process if you would like to
save coffee quantities for the remain-
ing cup symbols.
The saved quantities remain stored
3
when the coffee machine is switched
off.
11 Setting the Grinding
Texture
1 Note! The grinder settings must be
changed only while coffee is being
ground. Making adjustments to the
stationary grinder can damage the cof-
fee machine.
38
0 Press the Key for 1 cup of coffee (Fig.
3, b) to make one cup of coffee.
While the coffee is being ground, use
the Lever for setting grinding texture
(Fig. 2, U) and (Fig. 22) to change the
grinding texture.
The lever positions have the following
effects:
Fine grade for intensive taste
Medium grade for normal
taste
Coarse grade for mild coffee
Remove foreign bodies from the
grinder
Foreign bodies, such as small stones, in
the grinder can damage the grinder.
The coffee machine includes a stone
detector. A foreign body in the coffee
causes a loud, even rattle. If you hear
this noise while coffee is being ground,
immediately switch off the coffee
machine and remove the foreign body,
as described in „Cleaning the Grinder"
page 40.
12 Setting the Coffee
Temperature
There are five temperature levels to
choose from. In the "Set Coffee Tem-
perature" mode, the coffee quantity
indicator is illuminated, which now
acts as the coffee temperature indica-
tor.
The coffee temperature levels are indi-
cated as follows:
"lukewarm"
"warm"
"normal"
"hot"
"extra hot"