Timer Function - Pelgrim MAC714RVS Anleitung

USE

Timer function

EN 22
When the preheating is completed there is a short beep and a notice
appears on the display: "Preheating complete. Please put your dish
in the oven". The programme continues baking/roasting following the
selected settings. Delayed start function cannot be used when the
preheat function has been set.
The Timer function can only be selected in the 'Pro' mode. The Timer
can be programmed to delayed start and can automatically switch off
a selected oven programme. Set a cooking time (how long the oven
is to be switched on) and an end time (when the oven must switch
off). The delayed start time can only be set for the same day.
Setting the 'Cooking time'
1. Select the 'Cooking time' function by touching the corresponding
symbol.
2. Slide the menu to set the desired cooking time. In microwave mode
you can set the cooking time immediately.
Setting the 'End time'
Attention: make sure the clock is accurately set to current time.
1. Choose 'Extra settings' by touching the upper strip (next to the time
indication).
2. Select the 'End time' function by touching the corresponding symbol.
3. Slide the menu to set the desired end time.
Example:
• Current time: noon
• Cooking time: 2 hours
• End of cooking: 6 pm