Dimensions For Installation Use - DeDietrich DOP499 Serie Bedienungsanleitung

99634051_ML_A.qxd 18/05/04

Dimensions for installation use

The oven has an high-performance air circulation system which gives remarkable results for
cooking and cleaning, as long as the following points are applied:
lumn unit. Cut a hole measuring 50 mm x 50 mm in the back wall of the insert space for
the electric cable to pass through (See diagram, left).
beside it.
in the unit.
de uprights (see diagram). Make a 3 mm diameter hole in the side of the unit first to pre-
vent the wood from splitting.
30
13:05 Page 30
The oven may be fitted either underneath a work surface or in a suitable sized co-
Centre the oven in the unit, and make that it is at least 2 mm from any other unit
The unit must be heat-resistant (or covered with heat-resistant material).
The oven must be disconnected from the power supply while it is being installed
For greater stability, fix the oven in the unit with 2 screws in the holes on the si-
20
50
540
560
22
380
595
560-580
310
400
550 mini
560-580