Programming Your Chosen Cooking End Time - DeDietrich DOP499 Serie Bedienungsanleitung

99634051_ML_A.qxd 18/05/04
After carrying out these actions, the oven starts heating.
At the end of the cooking cycle, a series of beeps will be emitted for a few minutes and
the
You can stop the beeps by pressing on the START/STOP button for 1 second.
You may consult or modify the cooking end time at any moment by pressing on the
button.
To cancel your programme, press on the START/STOP button.
P
rogramming your chosen cooking end time
- Carry out the same procedure as for
programmed cooking, After setting the cooking
time,
- Press the "end of cooking"
control; the time for the end of cooking is
indicated and flashes, as does the
bol to indicate that it may be adjusted.
You have programmed a cooking time of 30 min
The end of cooking time indicated is 1 pm (13.00).
- Adjust the end of cooking time using the + or - touch controls
Once the end of cooking time has been programmed, normal time is displayed.
The oven will now start heating up in time for cooking to be finished by 2 pm (14.00).
When cooking is completed, a series of beeps are emitted for several minutes. You can
stop the oven from beeping by pressing on the START/STOP button for 1 second.
34
13:05 Page 34
symbol will start flashing.
, touch
Example : It is 12.30
Example: End of cooking time: 2 pm (14.00).
You may consult or change the end of cooking time at any time by
pressing the .
To cancel your program, press the START/STOP touch control
START
STOP
sym-
START
STOP