Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Tuning; Manual Tuning - Yamaha RX-V420RDS Bedienungsanleitung

Av receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 110

Automatic Tuning

Automatic tuning is effective when station signals are
strong and there is no interference.
D I G I T A L
STANDBY
SURROUND
/ON
BASS
TREBLE
BALANCE
SPEAKERS
A
B
PROGRAM
+
+
L
R
ON
OFF
PHONES
SILENT
1
Use INPUT l / h to select
TUNER as the input
source.
2
Press FM/AM to select the reception band (FM
or AM).
"FM" or "AM" appears on the display.
FM/AM
3
Press TUNING MODE (AUTO/MAN'L MONO) so
that the "AUTO" indicator lights up on the
display.
TUNING
MODE
AUTO/MAN'L MONO
If " z " appears on the display next to the band
indication, press PRESET/TUNING (EDIT) to turn it
off.
PRESET
/TUNING
EDIT
4
Press PRESET/TUNING l once to tune in to a
lower frequency and h once to tune in to a
higher frequency.
Press the button again if the tuning search does not stop
at the desired station.
y
• Use the manual tuning method if the tuning search does not stop
at the desired station (because the signal from the station is weak).
• When tuned in to a station, the "TUNED" indicator lights up and
the frequency of the received station is shown on the display. If an
RDS station that offers the PS data service is being received, the
station name is shown instead of the frequency on the display.
VOLUME
D I G I T A L
RDS MODE/FREQ
EON
PTY SEEK
MODE
START
INPUT MODE
PRESET
/TUNING
FM/AM
INPUT
EFFECT
PRESET/TUNING
A/B/C/D/E
EDIT
TUNING
MEMORY
MODE
MAN'L/AUTO FM AUTO/MAN'L MONO
VIDEO
L AUDIO R
VIDEO AUX
4
3 2
1
INPUT
or
Lights up
Turn " z " off
PRESET/TUNING

Manual Tuning

If the signal from the station you want to select is weak, you
must tune in to it manually.
1
Use INPUT l / h to select
TUNER as input source.
2
Press FM/AM to select the reception band (FM
or AM).
6CH INPUT
"FM" or "AM" appears on the display.
FM/AM
3
Press TUNING MODE (AUTO/MAN'L MONO) so
that the "AUTO" indicator goes off.
TUNING
MODE
AUTO/MAN'L MONO
If " z " appears on the display next to the band
indication, press PRESET/TUNING (EDIT) to turn it
off.
PRESET
/TUNING
EDIT
4
Press PRESET/TUNING l or h to tune in to
the desired station.
To continue the tuning search, hold down the button.
Note
• If you tune in manually to an FM station, it will be automatically
received in monaural mode to increase the signal quality.
INPUT
or
Goes off
Turn " z " off
PRESET/TUNING
TUNING
27

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis