Making The Appliance; Operational The First Time; Inserting An Anti-Scale Cartridge; Filling/Refilling The Water Tank - TurMix VX 200 Bedienungsanleitung

3. Commissioning
.1 Making the Appliance Before you make the appliance operational the first time, please read the
Operational the First Time
operating manual completely.
.. Installation Place the appliance for ironing on a firm and stable surface 1, , so that
adequate air circulation below the appliance is possible.
Ironing board pads with a wooden surface should be protected with an oil
cloth  or similar material to protect it from moisture.
1 
. Inserting anti-scale cartridges Pull out the water tank .
Remove the anti-scale cartridge from its anti-moisture protective covering 4
and insert it in the opening of the water tank provided 5.
The anti-scale cartridge must be inserted well in the water tank, so that
steam can be generated. Do not remove the filtering foam 6.
 4
!
!
i
5 6
.4 Filling/refilling the water tank Fill the water tank with tap water up to its upper edge 7.
Push the water tank firmly back into the appliance (locks in place) 8.
!
!
7 8
The water tank can be removed and refilled while ironing.
When the tank has been removed, do NOT press the steam trigger.
i
Caution! Do not remove the filtering foam and
insert the anti-scale cartridge completely!
Caution! Never fill hot water! Do not add any other
agents (ironing aids, perfume, etc)!
50 50
.5 Types of water
.6 Setting the thermostat
9
You can use: tap water, distilled water for irons, or a mixture of the two.
Do not use: Rain water, condensed water from the washing machine dryers,
defrosted water form the refrigerator or water from any evaporator appliance,
water from decalcifying plants and other decalcifying devices that work with
regenerating salts (incompatibility with the EMC system; also see page 56).
Durability of the anti-scale cartridge: The anti-scale cartridge must be
changed approximately monthly with an average ironing time of about 2-3
hours per week. Depending on the quantity of lime present in the tap water
and for an ironing time of 2 to 3 hours per week, it may be more economical
to use commercial distilled water. In this case, the anti-scale cartridge lasts 1
to 2 years (depending on the ironing time and steam quantity).
Adjust the thermostat of the iron according to the fabric.
•• •••
For steam ironing, a setting between and on the scale must be
selected 9.
Caution! For using steam, always set the thermostat
!
•• •••
between and !
!
i
We recommend sorting the clothes in the order indicated by the manufac-
turer on the iron's thermostat dial and starting with the lowest temperature.
THERMOSTAT TYPE OF CLOTH
• Synthetic fibres: Acetates -
Polyacrylics - Polyamides
••
Natural animal fibres: Silk - Wool
•••
Natural plant fibres: Cotton - Linen
51
D
FR
IT
EN
STEAM
Dry
Light steam
Heavy steam