Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
BS-25HR Endoscope
Item no. 1529791
Intended use
The endoscope is a visual aid for troubleshooting or inspection of voltage-free systems and
installations. The camera image is displayed on the built-in monitor. The light on the camera
head can be adjusted. The permanently installed gooseneck camera is waterproof (IP67) and
suited for use in watery liquids (no acidic or basic solutions). The main unit may not be exposed
to or submerged in moisture. Power supply is via four AA batteries (not included). Operation in
potentially explosive areas and/or use on persons or animals is not permitted.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Endoscope
• 3 x attachments (magnet, hook, mirror)
• Storage case
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
above. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on
using the device.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• The main unit is not waterproof and may therefore not be used under water.
• The endoscope is suited for inspection only in voltage-free systems. The camera
head is made of metal and can cause short-circuiting.
• For safety reasons, make sure all system components are voltage-free before
inspection.
• Always store the endoscope and all accessories in the case for periods of disuse.
Sensitive surfaces (with furniture polish, etc.) may react chemically when exposed
to the housing.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. Always allow
the product to reach room temperature before use. This may take several hours.
• The use of electrical devices must be supervised by trained staff in schools,
training centers, hobby and do-it-yourself workshops.
• In industrial facilities, heed all applicable accident prevention regulations for
electrical installations and equipment.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you are not sure about the correct connection or use, or if questions arise which
are not covered by these operating instructions, please do not hesitate to contact
our technical support or another qualified specialist.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
b) Batteries / Rechargeable batteries
• Correct polarity must be observed while inserting the batteries.
• Batteries should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave the battery lying
around, as there is risk, that children or pets swallow it.
• All the batteries should be replaced at the same time. Mixing old and new batteries
in the device can lead to battery leakage and device damage.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion.
Operating elements
1
2
3
4
5
6
7
8
9
1 Goose neck
4 ↓ button
2 Camera head
5
3 Monitor
6 ↑ button
Inserting / replacing batteries
• Remove the battery compartment cover from the back of the device.
• Insert four AA batteries into the battery compartment, observing correct polarity. Heed correct
polarity as indicated in the battery compartment.
• Close the battery compartment.
Change the batteries as soon as the battery symbol appears at the top right of the
monitor (3) or if the product no longer turns on.
7 Mirror attachment
(on/off) button
8 Magnet attachment
9 Hook attachment
Werbung
Inhaltsverzeichnis
