Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
Allow the equipment to stabilise at room temperature
before
taking
up
measurements).
*
Caution! Repeated sharp flexing can break the thermo-
couple leads. To prolong lead life, avoid sharp bends in the
leads, especially near the connector.
*
use extreme caution when the laser beam is turned ON
*
do not let the beam enter your eye, another person's eye or
the eye of an animal
*
be careful not to let the beam on a reflective surface strike
your eye
*
do not allow the laser light beam impinge on any gas which
can explode
*
do not let the beam of any body
*
allow the equipment to stabilise at room temperature before
taking up measurement (important for exact measurement)
*
do not modify the equipment in any way
*
opening the equipment and service- and repair work must
only be performed by qualified service personnel
*
Measuring instruments do not belong to children hands.
Cleaning the cabinet
Clean only with a damp soft cloth and a standard available mild
household cleaners. Ensure that no water gets inside the equipment
to prevent possible shorts and damage to the equipment.
measurement
(import
-17-
for
exact
Werbung
