SPORTSTECH F79 Benutzerhandbuch Seite 73

(Picture4) (Picture5)
Eighth Step:
Then put the communication wire, power wire and handrail light wire in the right side hole of the
meter (as picture 6.7), then connect these.
(Picture6) (Picture7)
Ninth Step:
Fix the meter on the frame, using toolkit M6 wrench. Lock tight four each bolts M8*15 with flat
washers (as picture 8.9).
(Picture8) (Picture9)
Tenth Step:
Then put the tidy wire in the meter. Finally, assemble the storage box which is in the accessory box
to the meter (as picture 10).
(Picture10) (Picture11)
73