SPORTSTECH F79 Benutzerhandbuch Seite 105

MAINTENANCE GUIDLINE
1. In order to maintain and prolong the working life of your treadmill, we suggest you power off for
10 minutes after every 2 hours' of running.
2. A loose running belt will lead to slip when you are running; a tight running belt will affect the
performance of the motor, also can increase the wearing of the rollers and running belt. The perfect
state is that the belt can be lifted from the running deck by about 50-75mm
Belt Centring and Tightness Adjustment
It is very necessary to adjust the belt optimally for the better use of the treadmill, and so it can work
better. Put the treadmill running belt at the center: Put the motorised treadmill on level ground. Let
the treadmill run at a speed of 6 to 8 miles per hour, observe running belt deviations. if the running
belt deviates to the right, pull off the safety key and unplug the power, turn the right side adjusting
bolt clockwise by 1/4 circle, plug the power and safety key, make the treadmill run and watch for
running belt deviations again. Repeat the above steps until the running belt is in centred. - Picture A
If the running belt deviates to the left, pull off the safety key, unplug the power, turn the left
adjusting bolt clockwise by 1/4 circle, plug the power andsafety key, make the treadmill run, watch
for deviations of the running belt. Repeat the above steps until the running belt is running in the
middle. - Picture B
If after the above adjustment or a period of time's use, the running belt would
become loose, it needs adjustment. Pull off the safety key, power switch, and turn the left and right
adjusting bolt clockwise by 1/4 circle, plug power and safety key, make the treadmill run, then
stand on the treadmill to confirm the tightness. Repeat the above steps until the running belt is
moderate in tightness. - Picture C
:A :B :C
PIC A. PIC B. PIC C.
105