Attachment - GDO 500S/L Einbau- Und Bedienungsanleitung

11. Attachment

11.1 Technical Data
Electrical Data
*)
Nominal voltage
Nominal frequency
Power consumption
Power input - operation
Power input - stand-by
Operating mode (operating time)
Control voltage
Protection category, motor unit
Protection class
*) subject to country-specific alternations
Mechanical Data
Max. push and pull force
General data
Motor unit dimensions
Total length
Weight
Temperature range
11.2 Declaration of incorporation
We hereby declare that the product sold by us
and mentioned below corresponds in its design, construction and version
to the relevant and basic health and safety requirements of the following
EC regulations: EMC Directive, Machinery Directive and Low Voltage
Directive.
On request of the authorized inspection authorities, the documentation is
available as hardcopy.
Product changes made without our consent will render this Declaration void.
Product: Garage door operator GDO 500S/L - 700S/L
Relevant EC Regulations:
- Machinery Directive 2006/42/EC
EN 60204-1:2007
EN ISO 12100-1:2003
EN ISO 13849-1:2008
Cat.2 / PLC for the functions of power limitation and end position
detection
EN 61508:2001
Essential health and safety requirements according to Annex 1:
General principles 1
No. 1.1.2, 1.1.3, 1.1.4, 1.1.5, 1.2.1, 1.2.4, 1.2.6,
1.3.1, 1.3.7, 1.3.9, 1.5.4, 1.5.6, 1.5.11, 1.5.14,
1.6.1, 1.6.2, 1.7.1, 1.7.3, 1.7.4
- Electromagnetic compatibility 2004/108/EC
EN 55014-1
EN 61000-3-2:2006 (2008)
EN 61000-3-3:2009
EN 61000-6-2:2006
EN 61000-6-3:2007
- Low Voltage Directive 2006/95/EC
EN 60335-1:2002
EN 60335-2-103:2004
GDO 500S/L - 700S/L (#91376)
GDO 500S/L GDO 700S/L
V 230 / 260
Hz 50 / 60
A 1,1
kW 0,2
W < 4
Min. KB 2
V DC 24
IP 20
II
GDO 500S/L GDO 700S/L
N 500 700
GDO 500S/L GDO 700S/L
mm 180x140x380
mm S=3248 L=3548
kg 9,5
°C -20 to +60
Scope of these installation and operating instructions:
Date of manufacture 01.06.2010 - 30.06.2011
01.06.2010
Manufacturer and document management:
Marantec Antriebs- und Steuerungstechnik GmbH & Co. KG
Remser Brook 11 · 33428 Marienfeld · Germany
Fon +49 (5247) 705-0
11.3 EC Declaration of Conformity
We hereby declare that the product sold by us
and mentioned below corresponds in its design, construction and version
to the relevant and basic health and safety requirements of the following
EC regulations: EMC Directive, Machinery Directive and Low Voltage
Directive.
Product changes made without our consent will render this Declaration void.
Product:
Relevant EC Regulations:
- Machinery Directive 2006/42/EC
EN 60204-1:2007
EN ISO 12100-1:2003
EN ISO 13849-1:2008
EN 61508:2001
- Electromagnetic compatibility 2004/108/EC
EN 55014-1
EN 61000-3-2:2006 (2008)
EN 61000-3-3:2009
EN 61000-6-2:2006
EN 61000-6-3:2007
- Low Voltage Directive 2006/95/EC
EN 60335-1:2002
EN 60335-2-103:2004
Date / Signature
ppa. K. Goldstein
Management
13