Unit Description; Getting To Know Your Device; Operation - Beurer MP 48 Gebrauchsanweisung

• Keep sensitive areas of skin such as scars and tattoos away from radiation.
• Never pull the mains adapter out of the socket using the mains cable or with wet hands.
IMPORTANT
• Never place any objects on the device. Do not cover the device while it is in operation.
• Protect the device from impacts, humidity, dirt, chemicals, marked temperature fluctuations and direct
sunlight.
• Make sure that the side air vents of the device are not covered.
• Repairs must only be carried out by Customer Services or authorised suppliers. Failure to comply will in-
validate the warranty.
• Never use the device near open flames or hot surfaces.
• Do not use the device if it is visibly damaged, does not function properly or if the mains plug or mains
adapter is damaged. In these cases, contact Customer Services.
3� Unit description
1. Mains adapter
2. ON/OFF button with three timer levels (30, 60 and 120 seconds)
3. Side air vents
4. Fan
5. Female connector
1
4� Getting to know your device
The MP 48 UV nail dryer is intended for artificial nail modelling using UV or LED nail gel. It can be used to
apply artificial nails to fingernails or toenails.
The special tunnel-like structure of the device reliably ensures that the nail coating sets evenly. You can
define the application duration depending on the type of nail gel using the built-in timer function (30, 60 or
120 seconds).
5� Operation
Note
• Check to ensure that the package contains all the parts that should be included in the delivery. If any
parts are missing or damaged, contact Customer Services.
• Remove all packaging material.
WARNING
Keep packaging material away from children to avoid danger of suffocation.
2
4
3
9
5