- Installing and fixing the device:
1. Fix the wall brackets to the wall with the provided screws in packing.
2. Hang the heat body to the fixed wall bracket.
3. Fix the lock pieces with the provided screw to the two top holes on the top of wall bracket.
Caution: Double check the safe distance according to drawing.
- Switching the appliance on/off
1. Set the I/0 switch (4) to the I position.
2. Press the Standby key "
temperature and set time (default 12:00). Press the standby key again to active the standby mode.
Note: Setting the I/0 switch (4) to "0" position deletes all the settings from memory.
Lock piece
Operation
" to exit the standby mode, the LCD display (2) shows current ambient