Child Lock Function; Setting Time; Maintenance - Klarstein 10006588 Bedienungsanleitung

Child lock function

1. To set the heater to a standby mode and apply the child lock function, simply press the standby key
and wait for 10 seconds.
2. When in operation mode, child lock function is automatically activated when no button is pressed for
10 seconds.
3. To unlock, press the OK key and then down key

- Setting time

To set the time press the TIME
keys to set the hour and confirm by pressing TIME key. Now minute digits "00" to blink, use up and down
keys to set the minute and confirm the minute by pressing TIME key again.
1. Always disconnect the appliance and let it completely cool before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never immerse the
unit in water, nor let water drip into the unit.
Your heater is fitted with a safety device to switches off the heater in the event of overheating. It will be
start to work automatically again when the thermal cut-out cool down.
If the heater fails to operate or the safety device switches the heater off again, return heater to your nearest
service center for examination or repair.
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction manual to the
original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage the appliance.
key, when the hour digits "12" starts to blink, use up and down

Maintenance

Overheat Safety Device
Storing
.