Information; Technical Description; Application Range And Intended Use; Technical And Operational Safety - GU SECURY Automatic mit A-Öffner Montage- Und Bedienungsanleitung

1

Information

These Assembly and Operating Instructions contain important advisory notes which must be
followed by all means to ensure appropriate assembly and trouble-free operation.
The details and specifi cations given in these instructions are to be observed by door fabricators,
installers, and operators.
In the following, the term „A-opener" also refers to the „A-opener servo".

1.1 Technical description

 Self-locking multipoint door lock
 Motor-driven release
 "GU-SECURY Automatic with A-opener / A-opener servo
 Latchbolts throwing 20 mm / secured against being forced back
 GU-SECURY Automatic and Automatic3 with VdS certifi cate grade A
 GU-SECURY Automatic4 and Automatic6 with VdS certifi cate grade B

1.2 Application range and intended use

 GU-SECURY Automatic with A-opener / A-opener servo is designed for vertically installed
doors.
 Its major fi eld of application is house entrance doors both in private and public buildings.
 'Intended use' comprises the observance of the manufacturer's operating and service
instructions which is essential for the avoidance of damage and injury.
 GU excludes any liability for damage arising from changes made on the lock without their
consent.
All deliveries are made on the basis of our General Terms and Conditions
2

Technical and operational safety

Danger !
Installation works involving the use of electrical equipment are
dangerous.
Insuffi cient wire cross sections may cause a fi re.
Therefore it is important to always observe the specifi ed cross sections.
Connections to a 230V mains are dangerous to life !
Never connect the A-opener / A-opener servo to a 230 V supply!
04.2016 | G32082 | Designed in Germany 15