User Settings - Online USV XANTO S 700 Benutzerhandbuch

O P E R A T I O N
Main menu Submenu
Identification
Settings

"User Settings"

"Service Settings"
4.1.3 User Settings
Description
Change language
User password
Audible Alarms
Set Date and Time
Signal Inputs
Relay
Configuration
Serial Port
Configuration
Output Voltage
Output Frequency
XS700-XS3000_manual_ger_eng_it_V1.1.0.doc
Display information of the menu function
UPS system type / Part number / Serial
number / Firmware
Please see Table 4 for details.
This menu is for customer service only and
protected by a password.
Table 3: Main menu
Available setting
"English", "German"
Menus, status, information warning messages
are displayed in the selected languages.
UPS errors, event log and settings are dis-
played in English.
Recommendation: switch to German.
"Enabled", "Disabled"
In the "Enabled" mode, the password is
"USER".
Recommendation: Do not change.
"Enabled", "Disabled"
Recommendation: Do not change.
Date: yyyy/mm/dd, Time: hh:mm
Recommendation: Set the date.
See programmable signal inputs
Recommendation: Do not change.
See Relay output contactors
Recommendation: Do not change.
1200 Baud, 2400 Baud, 9600 Baud
NOTE: For the
"2400 Baud" must be selected.
Recommendation: Do not change.
200V, 208V, 220V, 230V, 240V,
"Autosensing"
Recommendation: Do not change.
50Hz, 60Hz, "Automatic detection"
Recommendation: Do not change.
98 / 222
UPS communication,
...........................................................
Standard
setting
"English"
"Disabled"
"Enabled"
2008/01/01
12:00
2400 Baud
230V
"Automatic
detection"
R. Kistler