Transmitter Programming Procedure - Selve i-R Receive Bedienungsanleitung

Transmitter programming procedure

Group separation
3 sec. 3 sec.
Window 1
3 sec.
Transmitter 1
If the receivers still run in a group, repeat the process for the relevant
motors.
Note: If you did not learn in a transmitter by using the STOPP-button
and there is no other transmitter learnt in, you can learn in the trans-
mitter as described in section 1.1.
3 sec.
Window 2 Window 3
3 sec.
Transmitter 2
➧
Within 2 minutes every
✓
motor casually moves
shortly for 3 seconds.
In this time the motor
with the corresponding
3 sec.
transmitter needs to be
stopped.
Transmitter 3
39
GB
9 sec.
➧