Functions In Reprogramming Mode (Only For Qualified Personnel) - Selve i-R Receive Bedienungsanleitung

Transmitter programming procedure
GB
2.) Functions in reprogramming mode
(only for qualified personnel)
In order to carry out the following settings, the receiver has to be
put into reprogramming mode by disconnecting it from the
mains supply.
Note: • A transmitter has to be correctly programmed before it
can be put into reprogramming mode.
• The receiver remains in service mode for 4 minutes.
• Only put the transmitter into service mode that needs
to be set.
• In order to take a receiver out of reprogramming mode
(e. g. 3 receivers at one fuse), the motor has to be
actuated.
Fuse
3 sec. 3 sec.
The receiver confirms the service-mode by a short up and down
movement.
3 sec.
36