Programming Further Transmitters/Channels; Deprogramming Transmitters/Channels - Selve i-R Receive Bedienungsanleitung

Transmitter programming procedure

1.2) Programming further transmitters/channels

Press the PROG button of a programmed transmitter/channel or
i-R Receive for 3 seconds (wait for confirmation: brief upwards
and downwards movement of the motor). The receiver remains
in programming mode for 1 minute. Briefly press (1 sec.) the
PROG button of the new transmitter/channel. The new trans-
mitter/channel has now been programmed.
programmed transmitter/
channel
3 sec.

1.3) Deprogramming transmitters/channels

Press the PROG button of a programmed transmitter/channel or
i-R Receive for 3 seconds (wait for confirmation: brief upwards
and downwards movement of the motor). The receiver remains
in programming mode for 1 minute. Briefly press (1 sec.) the
PROG button of the transmitter/channel you wish to deprogram.
The transmitter/channel has now been deprogrammed.
programmed transmitter/
channel
3 sec.
new transmitter/channel
➡
transmitter/channel to be
deprogrammed
➡
35
1 sec.
✓
1 sec.
✓
GB