Preset Parameters - Quick MILL 04005 Bedienungsanleitung

P.
I.
d.
F.04
To quit programming parameter, switch off the machine through the main switch 1.

1.3 PRESET PARAMETERS

Parameter
F.03
P.
I.
d.
F.04
1.4 ALLARMS
In case of broken feeler, the display shows A1; the out-coming adjustment and the programming are disabled.
In case of a feeler in short circuit, the display shows A2, the out-coming adjustment and the programming are disabled.
2.1 TRANSDUCTION DEVICES
FEELERS' INPUTS
RECOGNITION RESOLUTION IN CYCLE
2.2 GENERAL SECURITY FEATURES
KIND OF PROTECTION AGAINST ELECTRO SHOCK
KIND OF INSULATION OF PARTS UNDER VOLTAGE
Where X.X stands for the value of the proportional constant of the
X.X
PID control
Where X.X stands for the value of the integrative constant of the
X.XX
PID control
Where X.X stands for the value of the derivative constant of the
XX.X
PID control
Where X stands for the correction negative factor of the
X
temperature (°C o F°)
NTC 3K3
1 grade.
Value
ºC
0,5
0,00
3,0
10
CLASS II
DOUBLE INSULATION OR REINFORCED INSULATION
15
°F
0,5
0,00
3,0
18