Key To Symbols - Sundstrom SR 500 Gebrauchsanleitung

22. Rubber belt SR 504
23. Leather belt SR 503
24. Harness SR 552
25. Fan unit SR 500, bare
26. Gasket to fan unit
27. Pre-filter holder SR 512
28. Pre-filter SR 221
29. Particle filter P3 R, SR 510
30. Filter adapter SR 511
31. Pre-filter holder SR 5153
32. Particle filter P3 R, SR 710
33. Gas filter A2, SR 518
34. Gas filter ABE1, SR 515
35. Gas filter A1BE2K1, SR 597
36. Combined filter A1BE2K1-Hg-P3 R,
SR 599
37. Splash cover SR 514
38. Plug kit

6.Key to symbols

Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC Certification Services Ltd.
Insulation class 2
Pressure and temperature compensated
7. Worn-out products
The fan unit contains a circuit board with electronic
components, a small proportion of which comprise toxic
substances. The battery contains no mercury, cadmium
or lead, and is therefore not regarded as environmentally
harmful waste. The plastic parts are marked with the
material code. For proper handling, collection and recy-
cling, worn-out fans should be handed in to a recycling
centre. Contact the local authorities for information on
the location of your nearest recycling centre.
Recycle in accordance with local regulations. Proper re-
cycling of the product contributes to efficient use of the
natural resources.
40
8. Approvals
T06-0104
T06-0103
• The SR 500 in combination with face shield SR 540,
T06-0116
welding shield SR 590, helmet with visor SR 580, hel-
R06-0110
met with visor SR 580 with welding shield SR 584,
R06-0107
hoods SR 520, SR 530, SR 561 or SR 562 is appro-
R06-0106
ved in accordance with EN 12941, class TH3.
H02-0312
• The SR 500 in combination with full face mask SR
H02-1312
200 or half mask SR 900 is approved in accordance
R06-0105
with EN 12942, class TM3.
R01-0604
• The SR 500 conforms to the requirements of EN
H02-1512
H02-7012 61000-6-3 Emission and EN 61000-6-2 Immunity,
H02-7112 which makes the fan conform to EMC Directive
H02-7212
2004/108/EC..
• The electronics ingress protection is approved in IP
H02-7312
classification IP67 in accordance with IEC/EN 60529.
T06-0114
R06-0703
The EC type approval certificate has been issued by No-
tified Body No. 0194. For address, see back-cover.
Australian StandardsMark
The fan SR 500 is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").