Electrical Connection - Pkm EB-C4K Bedienungsanleitung

3. Adjust the brackets relevant to the thickness of the worktop.
Hob
1. The hob must be installed by a qualified professional. Do not carry
out the installation yourself.
2. Do not install the appliance above cooling equipment, dish washers
or laundry dryers.
3. When installing the appliance ensure optimal heat radiation to
maintain the operating safety.
4. The wall and the reach of the heat radiation above the worktop must
be made of heat-resistant materials.
5. To avoid any damage, the sandwich layer and adhesive must resist
heat.
6. Never use a steam cleaner.

Electrical connection

1. An all-pole disconnecting device must be incorporated during installation.
Disconnecting devices are switches with a contact opening distance of at least 3
mm. These include LS-switches, fuses and protectors (EN 30335).
2. The cable must be replaced by a qualified professional only when damaged.
3. The cable must not be bent or pressed.
4. Check periodically that the cable is in proper condition.
5. Read the information on the model plate and the connection diagram.
Worktop
Bracket
WARNING!
25
Hob Worktop
Bracket