Tascam DR-10C Bedienungsanleitung Seite 19

Menu item Summary
MODEL SELECT Model setting
File name type
FILE NAME TYP
setting
FILE NAME Set the file name [DR0000]
Setting items
(default value Explanation
underlined)
Set according to the model being used.
This changes internal settings that are necessary to support each model.
Check the TEAC Global Site (http://teac-global.com/) for details.
SENN: DR-10CS (for Sennheiser)
SHURE: DR-10CH or DR-10C with AK-DR10CH (for Shure) attached
SENN/SHURE/
RAMSA: DR-10C with AK-DR10CR (for SONY/RAMSA) attached and switch set for RAMSA
RAMSA/SONY
SONY: DR-10C with AK-DR10CR (for SONY/RAMSA) attached and switch set for SONY
NOTE
Executing the SYSTEM INIT function will not initialize this setting. When shipped new from the factory,
this setting is "SENN" for the DR-10CS (model for SENNHEISER) and "SHURE" for the DR-10CH (model for
SHURE).
You can select the format of names given to files recorded by this unit.
WORD: The 6 characters set using the Menu Screen
WORD/DATE Example: 000_ DR0000.wav
DATE: The date is used as the file name (in yymmdd format).
Example: 000_110101.wav
Press the 7'9 [ENTER] button to move the cursor from left to right one character at a time.
When the cursor is at the character on the far right, press the 7'9 [ENTER] button to confirm the file name
and return to the Menu Screen.
Use the . [j] and / [k] buttons to change the character at the cursor position.
In addition to the alphabet and numbers, the following characters can be used:
! # $ % & '( ) + , - . ; = @ [] ^ _ ` { }
TIP
When using more than one of these units, you can set the file name in advance to identify which units
were used to record files. This can be convenient when editing files. (See "Using infrared transmission" on
page 15.)
Example
Units: 1st (DR0001), 2nd (DR0002), 3rd (DR0003)... 10th (DR0010)
File names: 000_DR0001.wav, 000_DR0002.wav, 000_DR0003.wav... 000_DR0010.wav
item is used for file names.
FILE NAME
TASCAM DR-10C
19